Add Fuel to the Furnace. For making the stone scratch free dip the stone in the water and use the 160 grit paper.
The process is simple.
How to polish stone. Apply approximately 12 cup Shining Powder plus 1 cup clean water to stone surface. Open the Furnace Menu. Allow at least 7 days tumbling.
Use a clean rag or paper towel to pat the stone dry. Please note this stage is very significant and determines the final polish it is vital you do not cut it short. Keep doing this until you get the desired shape.
Another straightforward way is with a soda. You can use it as a polish apart from quenching thirst. Use a rotating rubbing motion to work the polish compound onto the stone.
In this tutorial we are going to use coal as our fuel. Thoroughly clean stones and barrel by removing both end caps washing carefully. Either way when you dry the stone make sure that it is dried completely.
Stones surface grinding and polish with simple means120-220-400-1000 of silicon carbide gritPolishing ceroxid powderMusical compositions and Video product. If your stone is already in good shape this step is not needed. Using a heavy fabric such as denim polish the rocks until they begin to shine or show luster.
This step is used to remove the big scratches only. Therefore you should thoroughly wash all the dust off the rock water and then dry it before you put polish on. Next you need to add fuel to the bottom fuel box in the furnace.
First open your furnace so that you have the Furnace menu that looks like this. The chemical composition of the drink removes all the oils that opaque the stone. Dont forget to keep a bucket of water near you.
Slowly clean and rub the stone. Alternatively you can leave it out in the open air so any remaining water can evaporate. Place one portion of the substance on the fabric and rub gently over the gem surface.
You may need to add more wax depending on the size of the rock but make sure to only add it in little amounts at a time. Add Shining Powder as needed. But take heart youve worked really hard.
When youre ready to polish the rock get your rag and put a small dot of car wax on it and rub it in to the rock. You should have a beautiful perfectly polished Petoskey stone you. How to craft Smooth Stone in Survival Mode 1.
Always wet the stone before rubbing. Keep Shining Powder wet with water while refinishing. The last thing to do is to dry the stone.
5 Steps on How to Clean Concrete Floors Both Outdoor and Indoor. Proceed as before using the same proportions of grit and water but this time use 400 grit. One of the main ways that a stone surface is polished is through the use of polishing pads.
Polishing the Stones Apply the finishing polish to the stones and gems. Youll notice that the final result looks a bit rougher than the stones you get through your tumbler. At this point you may choose to either continue polishing with the cloth or you may coat the stones and gems with mineral oil or commercial rock polish.
Refinish area with hand buffer or weighted 175 RPM floor machine at 130-140 lbs fitted with a natural hair pad. Using granite polishing pads and other pads to polish stone a fabricator can progressively smooth out the surface of the material until the shiny look is achieved. Wipe with a clean dry cloth.
Let it air dry then apply a commercial stone polish you can find this at just about any good hobby store that knows a thing or two about rock hounds. Polishing pads for stone materials are a lot like sandpaper is for wood.
Source : pinterest.com